Trigger Machine | MMM Trig

Trigger Machine | MMM Trig

  • Trigger tightening machine of in-line model, designed for screw caps and trigger pumps.

    The purpose of the trigger sealer is to close packs, which are equipped with a spray pump (trigger pump), in an economically justified manner with an adjustable force and a high repetitive accuracy. The packages are manually fitted with the spray pump by an operator who places the spray pump in the package and lightly tightens the swivel on the package. The machine automatically takes care of the processing of the automatic packages.

     

    • Very compact machine
    • Ergonomic construction
    • Working height of the machine adjustable between 920 and 980mm.
    • Easily adjustable
    • Closing height and diameter adjustable by means of a hand wheel in function of the bottle. Both are measured with a counter, therefore previous settings can be easily repeated.
    • Adjustable tightening speed and force for better closure.
    • Adjustable stop and stop cylinders attached to the machine.
    • Equipped with top guide for alignment of the spray head with the package.
    • Four tightening rollers for proper centering.
    • Simple and intuitive operation and maintenance
    • Simple control panel with touch screen)
    • Worn drive rollers can be easily replaced.
    • Minimal wear by monitoring the tightening torque, above which the motor stops.
    • Frame constructed of 304 stainless steel and anodized aluminum.
    • Maintenance-free electric torque motors, type BLDC.
    • No format parts required.
    • Automatic inlet and outlet control of packages and check for tightened cap.
    • Safe machine
    • Aluminum frame with polycarbonate shielding. All moving parts are located within this cabinet and are shielded from the operator.
    • CAT. 2 system architecture, Performance level C.
    • The machine conforms to the latest machine directives. Reference: 2006/42/EC
    • Capacity
    • 1200 closures per hour on average.
    • Flexibly deployable
    • Possibility of placing over different sizes of conveyor belts.
    • Different sizes of bottles can be closed.
    • Possibility of closing normal caps without a pump.
  •  

     

    Physical dimensions

    Depth 1020 mm (exclusive electrical cabinet)
    Width 1560 mm
    Height 1935 mm (exclusive signal beam)

     

    Cobot Palletizer | Doosan M1013

    Cobot Palletizer | Doosan M1013

     

      • Frame of SS 304.
      • Doosan Robot – M1013 ( payload 10kg).
      • Reach 1300 mm.
      • Moveable with transpallet or forklift.
      • Conveyor for pick-up made of SS 304.
      • Intralox S1000chain.
      • SEW motor.
      • Two sides can be used for stacking.
      • Manual reload of empty pallets.
      • Vacuum gripper.
      • OmniPack builder software.
      • Ewelix Liftkit.
      • Frame for slipsheet.
      • Safety scanners.
      • Three different angles for positioning conveyor.
      • Easy to move between production lines.
      • Colour and signal beacon.

     

     

    Boxes

    Weight max.10 kg

    Physical dimensions – Conveyor

    Length 1500 mm
    Width 304 mm
    Height 770 mm (+-50 mm)

    Physical dimensions – Unit

    Length 1360 mm
    Width 810 mm
    Height 800 mm (exclusieve Cobot)
    Height 2372 mm ( cobot fully extended)

     

    Packfeeder | Robotic pickFeeder series

    Packfeeder | Plastic Botlle Unscrambler
    Robotic pickFeeder series | All about versatility – we are FLEXIBLE

    Packfeeder is a private company, started in 2002 in Terrassa, Barcelona, a leading company in bottle unscrambling solutions with worldwide patented technologies.

    Once again, the Packfeeder team manages to go one step further in the bottle unscrambling system world developing the pickFeeder series. This robotic bottle unscrambler, configurable with one, two, three or even four robots, offers a wide range of applications and possibilities. Our combination of delta robots with an intelligent track system makes the pickFeeder the most versatile automatic format change machine of the market, optimizing the performance of the intelligent systems and guaranteeing the best soft transfer in the world.

     

     

    • Maximum versatility
      All the bottle unscrambling machines in our pickFeeder series have a great adaptability to any kind of bottle and geometry to work. Thanks to the artificial vision, picking and tracking systems developed, the equipment will adapt automatically to the changing requirements in terms of shape, colours and needs of the packaging lines. Boost your possibilities with the pickFeeder series.
    • Close to Zero changeover
      Ideal for multi-format lines, where changeover must be fast, agile and clean, especially in small batch productions. With the pickFeeder robot bottle unscrambling series, we propose an automatic changeover to reduce the amount of downtime between production runs and forget about any kind of adjustment, setting or test before starting to produce again. This, also has a positive effect in terms of reducing the total cost of the equipment in its entire life cycle.
    • New formats, cost 0
      With the pickFeeder robotic bottle sorting series we can incorporate the concept of marginal cost 0 for the new formats. Thanks to the technology developed, the new containers won’t need new format parts neither complex configurations, therefore, the costs will be practically non-existent and the delivery time will be immediate due to the lack of new accessories to produce and adjust. Moreover, a simple application allows the user to easily configure new formats. We facilitate the launch of new products.
    • Do it Yourself
      Thanks to our state-of-the-art software vision and a simple application developed, the pickFeeder bottle unscrambler systems allows the customer to quickly and easily configure new formats with no need for delivery time or extra format parts, providing an effective, immediate and very cheap solution. The customers’ autonomy is maximum for the entire life cycle of the machine.
    • Permanent Bottle Vision
      The great visibility of the bottles offered by the Packfeeder robotic bottle unscramblers throughout its process, allows simple and quick operations when required optimizing the performance of the equipment and, consequently the one of the whole production line.
    • Extreme container care
      Thanks to our know-how in delicate applications such as using PET or PP materials, screen-printed bottles, labels or stamps, the new pickFeeder series keeps an exquisite treatment of the packaging throughout its process thanks to the use of the most advanced techniques and solutions for the handling of containers and objects.
    • Boosted productivity per m2
      The robotic bottle unscrambler concept developed by Packfeeder optimizes the space in the packaging room, offering the maximum production speed of the market for every square meter used. The ergonomics of the machine together with its efficient design, allow to increase the throwput of the available area.
    • Taylor made solutions
      The modularity of the pickFeeder series not only allows to choose between 1, 2, 3 or 4 robotic units, but also offers the possibility of incorporating other configurations depending of every project needs. Some of these configurable elements are pucks transportation system, orientation of asymmetric bottles, glass tray loader, bottle rinsing / cleaning systems or even coding & traceability. Everyhting designed to guarantee the best tailored solution for every customer.

    Click here to visit Packfeeder.com

    Filling Machine | IF 80

    Filling Machine | IF 80
    Filling Machine of in-line model, piston based, with 8 filling nozzles.

     

      • Frame of SS304.
      • Bottom drip tray made of SS304 with tap mounted in bottom of machine.
      • Interlocked front doors in SS304 with windows in hardened glass.
      • Product system in SS304 with tri-clamp or flange connections.
      • Product manifold in SS304. Equipped with one pneumatic product inlet valve.
      • Easy adjustment and recipe management on 9 inch colour touch panel mounted on electrical cabinet.
      • Eight pistons, SS304, Ø depending on volume. Bosch Servo driven
      • Volume 1.000ml –> 5.000ml.
      • Eight pneumatic actuators, with electrical position indicator.
      • Eight filling nozzles for bottom filling.
      • Bosch Servo driven filling bridge with possibility to bottom fill and following under liquid surface.
      • Container volume and fine/coarse volumes are saved within recipes.
      • Driptray in SS304 to collect spillage from filling nozzles.
      • Product hoses in conductive PTFE with stainless braiding on the outside equipped with Tri-clamp connections.
      • Local control panel with illuminated pushbuttons for operation (e.g. start/stop, manual adjustment, emergency stop and reset of interlockeddoors).
      • Nozzle guard (e.g. automatic stop if filling nozzles hit container).
      • Extra rigid gating system in SS304 consisting of two gates mounted on filling conveyor body.
      • The machine is available in ATEX version.
      • The machine is available with easy remote access (EWON).
        • Optional:
        • Mass flow meter, possible to fill either with weight or volume
        • Contact parts in SS316.
        • CIP.

     

     

    Dimensions

     

    Lowest conveyor height 500 mm
    Maximum conveyor width 550 mm
    Lowest capping height 700 mm
    Highest capping height 1400 mm
    Span between the highest and lowest container 410 mm

    Containers (bottles, cans, etc.)

    Length 30-475mm
    Width/ Diameter 30-270 mm
    Height* Depending on conveyor height

    Physical dimensions

    Length 2040 mm (exclusive electrical cabinet)
    Width 1650 mm
    Height 2160 mm (exclusive signal beam)

    * For a conveyor height of 850 mm the maximum height of the container is 540 mm.

    Robot Palletizer | Skilled 504

    Robot Palletizer | Skilled 504

     

    • The Skilled 504 is an electro mechanical robot with articulated cinematic structure type SCARA with 4 interpolated axes, and a working area of 360°. Our first SCARA robot (Selectively Compliant Assembly Robot Arm) was launched in the market in 1996 and since then it has been installed in over 1000 plants worldwide. Thanks to its high flexibility and possibility to customize the pick-up tool for illimitated range of applications (cardboard boxes, bundles, heat-shrunk trays, bags, cans, reels, etc.), the Skilled 504 has been used to solve a wide variety of end-of-the-line product handling problems in the most diverse plant logistic situations. Its friendly and powerful programming method has been developed in Visual Basic completely by our engineers on the basis of 30 years experience in the palletizing field, in order to quickly carry out any kind of personalization at any time.

     

    • Skilled 504 is ideal for palletising multiple lines:
      • Clever design to work also in a narrow working area
      • Payload 120 kg including gripper
      • 4 axes
      • 800 cycles/hour

    Click here to visit Skilledgroup.com

    Cap Elevator | Hopper 160

    Cap Elevator | Hopper 160

     

      • Frame of SS 304.
      • Bunker 200L.
      • Rollco conveyorbelt with carriers.
      • Width conveyor 160 mm.
      • Motor 0.18kW.
      • Ten different heights can be used.

     

     

    Physical dimensions

    Length 2098 mm
    Width 784 mm
    Height 2465 mm

    Automatic Pallet Dispenser | MAG1 – MAG2

    Automatic Pallet Dispenser | MAG1 – placed over conveyor
    Automatic Pallet Dispenser | MAG2 – aligned next to conveyor

     

      • Frame of painted steel.
      • Used for stacking and destacking of empty pallets.
      • Piles of 10 till 15 pallets.
      • Pallets between 800×600 – 1200×1200.
      • Loading by forklift, LGV or electrical transpallet.
      • Festo pneumatic cylinder with brake and valves for open and close movement.
      • SEW motor for op and down movement.
      • Motor mounted right or left.
      • Heighth of stack always controlled by photoelectric distance sensor.
      • Siemens HMI + PLC.
      • Can be used “stand alone” or integrated in robotcell.

      Palletmagazijn top palmag2 palmag

     

     

    Physical dimensions – Unit

    Length 1918 mm (exclusive motor and elecrical cabinet)
    Length 2295 mm (all in)
    Width 1695 mm (MAG1)
    Width 1995 mm (MAG2)
    Height 2105 mm (exclusive signal beacon)

    Skilled AGV | LGV

    Skilled AGV | LGV

     

    • AGV is the acronym for Automatic Guided Vehicle and it identifies Driverless fork-trucks which are used in industrial applications to carry pallets and/or materials to/from programmed positions in production areas, in warehouses, in the dock area and now also capable to reach in and load trucks. The AGV receives orders directly from warehouse management systems, the field, or from any type of software or hardware interface. The AGVs operate 24 hours/7 in total safety for the environment and anyone that could be in the operating area.
      Skilled AGVs operate with precisely controlled navigation, acceleration and deceleration; this minimizes the potential damage and makes AGVs an excellent choice in the material handling.

     

    • Skilled LGV (Laser Guided Vehicle) is an automatic fork lift truck which, together with our palletizing systems, allows complete “end of line” automation. This results is cost savings and significant improvements in production management.Our LGVs are usually equipped with forks which can be for a single pallet/double pallets or even pallets that must be lifted upto 10 mts in a warehouse. However since we customize the AGVs according to the application, there is no problem to equip them with other tools such as clamps to pick up rolls or conveyors to pick-up unitized products etc. The LGVs can fit in any area or industry where a fork-truck is used. Euroimpianti’s experience has been strong in the following industries: food, paper, tissue-paper, automotive (tires), beverage, chemical-cosmetic and pharmaceutical, dairy, electrical, glass, tobacco and all general manufacturing plants.

     

    • Skilled LGV offers the following advantages:
      • Transportation of different products and pallets, coming from different production lines, from and to the storage and trucking area (with total exclusion of conveyor work)
      • Compliance with the current safety rules and regulations
      • Thanks to its modularity the system can easily be adapted to future production needs
      • Extremely easy installation at customer’s site, that saves productivity time

     

    • Skilled 800
      The Skilled LGV 800 is equipped with counterbalance and wheels included in the machine’s frame
      Standard lifting height up to: 1000 mm-S/1500mm-M
      Loading capacity up to: 500 kg-S/800Kg-M
    • Skilled 1000
      The Skilled LGV 1000 is equipped withwith counterbalance and wheels included in the machine’s frame
      Standard lifting height up to: 2000 mm-M/4000mm-L
      Loading capacity up to: 1200 kg-M/1500Kg-L
    • Skilled 1400
      The Skilled LGV 1400 is equipped with with advanced wheels
      Standard lifting height up to: 2500 mm-M/4000mm-L
      Loading capacity up to: 1500 kg-M/2500Kg-L
    • Skilled 1400 XL
      The Skilled LGV 1400 XL is equipped with counterbalance and wheels included in the machine’s frame
      Standard lifting height up to: 4000 mm-M/8500mm-L
      Loading capacity up to: 1500 kg-M/1800Kg-LNOTE – Min. and max. loading capacity is depending on the lifting height. It’s possibile to have the top pressure for unstable pallets. Battery options: manual change, automatic change, independent automatic re-charging

     

    Click here to visit Skilledgroup.com

     

    Robot Palletizer | Fanuc M410

    Robot Palletizer | Fanuc M410

     

    • Custom made palletizing robot cell
    • The palletiser – designed specifically for the job, this series increases throughput on palletising and handling applications. With a capacity up to 700 kg and a reach up to 3.1 m, the 4 axis M-410 parallel link robot series is ideal for handling medium to heavy payloads. FANUC was one of the first robot suppliers to develop a series specifically designed for palletising and draws on years of experience in end of line automation.

      Operating within an optimised work space and benefiting from a high vertical stroke, the M-410 palletising robot is specifically designed to stack pallets up to a height of 2 metres. The integrated base and controller in the pedestal (non-pedestal version is also available) not only saves floor space but also makes transportation and installation easier.

      With models capable of handling anything from 110 to 700 kg payloads, whether it be boxes, bags or slabs of concrete, there is a M-410 for every palletising job.

       

      Render M410 | 185