Filling Machine | IF 80

Filling Machine | IF 80
Filling Machine of in-line model, piston based, with 8 filling nozzles.

 

    • Frame of SS304.
    • Bottom drip tray made of SS304 with tap mounted in bottom of machine.
    • Interlocked front doors in SS304 with windows in hardened glass.
    • Product system in SS304 with tri-clamp or flange connections.
    • Product manifold in SS304. Equipped with one pneumatic product inlet valve.
    • Easy adjustment and recipe management on 9 inch colour touch panel mounted on electrical cabinet.
    • Eight pistons, SS304, Ø depending on volume. Bosch Servo driven
    • Volume 1.000ml –> 5.000ml.
    • Eight pneumatic actuators, with electrical position indicator.
    • Eight filling nozzles for bottom filling.
    • Bosch Servo driven filling bridge with possibility to bottom fill and following under liquid surface.
    • Container volume and fine/coarse volumes are saved within recipes.
    • Driptray in SS304 to collect spillage from filling nozzles.
    • Product hoses in conductive PTFE with stainless braiding on the outside equipped with Tri-clamp connections.
    • Local control panel with illuminated pushbuttons for operation (e.g. start/stop, manual adjustment, emergency stop and reset of interlockeddoors).
    • Nozzle guard (e.g. automatic stop if filling nozzles hit container).
    • Extra rigid gating system in SS304 consisting of two gates mounted on filling conveyor body.
    • The machine is available in ATEX version.
    • The machine is available with easy remote access (EWON).
      • Optional:
      • Mass flow meter, possible to fill either with weight or volume
      • Contact parts in SS316.
      • CIP.

 

 

Dimensions

 

Lowest conveyor height 500 mm
Maximum conveyor width 550 mm
Lowest capping height 700 mm
Highest capping height 1400 mm
Span between the highest and lowest container 410 mm

Containers (bottles, cans, etc.)

Length 30-475mm
Width/ Diameter 30-270 mm
Height* Depending on conveyor height

Physical dimensions

Length 2040 mm (exclusive electrical cabinet)
Width 1650 mm
Height 2160 mm (exclusive signal beam)

* For a conveyor height of 850 mm the maximum height of the container is 540 mm.

Capping Machine | IC 10

Capping Machine | IC 10

Capping Machine of in-line model, designed for both screw and pressure caps.

 

    • Frame of SS 304.
    • Interlocked front doors in SS 304 with windows in hardened glass.
    • Pneumatic sorting of caps by air nozzles in sorter drum.
    • Servo driven tightening or positioning of caps.
    • Centering and anti-rotation device mounted on the capping head.
    • Head mounted on a trolley that runs between two shaft to provide the most stable and flexible machine as possible.
    • Can be equipped with one or two tightening station which provides a capacity of up to 40 containers – minute for one station and 70 containers – minute for the two stations.
    • Machines with one tightening station can be equipped with either gating system or indexing wheel, for machines with two tightening stations the alternative is infeed worm screws or index wheel depending upon application.
    • To simplify the product changes, the manual adjustments are minimized to a few. All settings of values such as torque, down pressure and holding torque of packaging lies within the recipe.

  • User interface via a 5.7 “colour touch screen which also provides information on machine status and any alarms.
  • Five colour signal beacon.
  • Integrated control with frequency inverter for conveyor.
  • Integrated control of cap elevator.
  • The machine is available in ATEX version.
  • The machine is available with easy remote access (EWON).

 

 

Dimensions

Lowest conveyor height 500 mm
Maximum conveyor width 550 mm
Lowest capping height 700 mm
Highest capping height 1400 mm
Span between the highest and lowest container 410 mm

Containers (bottles, cans, etc.)

Length 30-475mm
Width/ Diameter 30-270 mm
Height* Depending on conveyor height

Caps

Width/ Diameter 20 – 100 mm
Height 10 – 60 mm
Tightening torque 4 / 8 / 25 Nm
Capping pressure Max 750 N

Physical dimensions

Length 1250 mm (exclusive electrical cabinet)
Width 2128 mm
Height 2200 mm (exclusive signal beam)

* For a conveyor height of 850 mm the maximum height of the container is 540 mm.