Trigger Machine | MMM Trig

Trigger Machine | MMM Trig

  • Trigger tightening machine of in-line model, designed for screw caps and trigger pumps.

    The purpose of the trigger sealer is to close packs, which are equipped with a spray pump (trigger pump), in an economically justified manner with an adjustable force and a high repetitive accuracy. The packages are manually fitted with the spray pump by an operator who places the spray pump in the package and lightly tightens the swivel on the package. The machine automatically takes care of the processing of the automatic packages.

     

    • Very compact machine
    • Ergonomic construction
    • Working height of the machine adjustable between 920 and 980mm.
    • Easily adjustable
    • Closing height and diameter adjustable by means of a hand wheel in function of the bottle. Both are measured with a counter, therefore previous settings can be easily repeated.
    • Adjustable tightening speed and force for better closure.
    • Adjustable stop and stop cylinders attached to the machine.
    • Equipped with top guide for alignment of the spray head with the package.
    • Four tightening rollers for proper centering.
    • Simple and intuitive operation and maintenance
    • Simple control panel with touch screen)
    • Worn drive rollers can be easily replaced.
    • Minimal wear by monitoring the tightening torque, above which the motor stops.
    • Frame constructed of 304 stainless steel and anodized aluminum.
    • Maintenance-free electric torque motors, type BLDC.
    • No format parts required.
    • Automatic inlet and outlet control of packages and check for tightened cap.
    • Safe machine
    • Aluminum frame with polycarbonate shielding. All moving parts are located within this cabinet and are shielded from the operator.
    • CAT. 2 system architecture, Performance level C.
    • The machine conforms to the latest machine directives. Reference: 2006/42/EC
    • Capacity
    • 1200 closures per hour on average.
    • Flexibly deployable
    • Possibility of placing over different sizes of conveyor belts.
    • Different sizes of bottles can be closed.
    • Possibility of closing normal caps without a pump.
  •  

     

    Physical dimensions

    Depth 1020 mm (exclusive electrical cabinet)
    Width 1560 mm
    Height 1935 mm (exclusive signal beam)

     

    Cap Elevator | Hopper 160

    Cap Elevator | Hopper 160

     

      • Frame of SS 304.
      • Bunker 200L.
      • Rollco conveyorbelt with carriers.
      • Width conveyor 160 mm.
      • Motor 0.18kW.
      • Ten different heights can be used.

     

     

    Physical dimensions

    Length 2098 mm
    Width 784 mm
    Height 2465 mm

    Capping Machine | IC 10

    Capping Machine | IC 10

    Capping Machine of in-line model, designed for both screw and pressure caps.

     

      • Frame of SS 304.
      • Interlocked front doors in SS 304 with windows in hardened glass.
      • Pneumatic sorting of caps by air nozzles in sorter drum.
      • Servo driven tightening or positioning of caps.
      • Centering and anti-rotation device mounted on the capping head.
      • Head mounted on a trolley that runs between two shaft to provide the most stable and flexible machine as possible.
      • Can be equipped with one or two tightening station which provides a capacity of up to 40 containers – minute for one station and 70 containers – minute for the two stations.
      • Machines with one tightening station can be equipped with either gating system or indexing wheel, for machines with two tightening stations the alternative is infeed worm screws or index wheel depending upon application.
      • To simplify the product changes, the manual adjustments are minimized to a few. All settings of values such as torque, down pressure and holding torque of packaging lies within the recipe.

    • User interface via a 5.7 “colour touch screen which also provides information on machine status and any alarms.
    • Five colour signal beacon.
    • Integrated control with frequency inverter for conveyor.
    • Integrated control of cap elevator.
    • The machine is available in ATEX version.
    • The machine is available with easy remote access (EWON).

     

     

    Dimensions

    Lowest conveyor height 500 mm
    Maximum conveyor width 550 mm
    Lowest capping height 700 mm
    Highest capping height 1400 mm
    Span between the highest and lowest container 410 mm

    Containers (bottles, cans, etc.)

    Length 30-475mm
    Width/ Diameter 30-270 mm
    Height* Depending on conveyor height

    Caps

    Width/ Diameter 20 – 100 mm
    Height 10 – 60 mm
    Tightening torque 4 / 8 / 25 Nm
    Capping pressure Max 750 N

    Physical dimensions

    Length 1250 mm (exclusive electrical cabinet)
    Width 2128 mm
    Height 2200 mm (exclusive signal beam)

    * For a conveyor height of 850 mm the maximum height of the container is 540 mm.