Trigger Machine | MMM Trig

  • Trigger tightening machine of in-line model, designed for screw caps and trigger pumps.

    The purpose of the trigger sealer is to close packs, which are equipped with a spray pump (trigger pump), in an economically justified manner with an adjustable force and a high repetitive accuracy. The packages are manually fitted with the spray pump by an operator who places the spray pump in the package and lightly tightens the swivel on the package. The machine automatically takes care of the processing of the automatic packages.


    • Very compact machine
    • Ergonomic construction
    • Working height of the machine adjustable between 920 and 980mm.
    • Easily adjustable
    • Closing height and diameter adjustable by means of a hand wheel in function of the bottle. Both are measured with a counter, therefore previous settings can be easily repeated.
    • Adjustable tightening speed and force for better closure.
    • Adjustable stop and stop cylinders attached to the machine.
    • Equipped with top guide for alignment of the spray head with the package.
    • Four tightening rollers for proper centering.
    • Simple and intuitive operation and maintenance
    • Simple control panel with touch screen)
    • Worn drive rollers can be easily replaced.
    • Minimal wear by monitoring the tightening torque, above which the motor stops.
    • Frame constructed of 304 stainless steel and anodized aluminum.
    • Maintenance-free electric torque motors, type BLDC.
    • No format parts required.
    • Automatic inlet and outlet control of packages and check for tightened cap.
    • Safe machine
    • Aluminum frame with polycarbonate shielding. All moving parts are located within this cabinet and are shielded from the operator.
    • CAT. 2 system architecture, Performance level C.
    • The machine conforms to the latest machine directives. Reference: 2006/42/EC
    • Capacity
    • 1200 closures per hour on average.
    • Flexibly deployable
    • Possibility of placing over different sizes of conveyor belts.
    • Different sizes of bottles can be closed.
    • Possibility of closing normal caps without a pump.


    Physical dimensions

    Depth 1020 mm (exclusive electrical cabinet)
    Width 1560 mm
    Height 1935 mm (exclusive signal beam)


    Trigger Machine | MMM Trig

    By alax_automation In Sluiten No comments

    Cobot Palletizer | Doosan M1013


      • Frame of SS 304.
      • Doosan Robot – M1013 ( payload 10kg).
      • Reach 1300 mm.
      • Moveable with transpallet or forklift.
      • Conveyor for pick-up made of SS 304.
      • Intralox S1000chain.
      • SEW motor.
      • Two sides can be used for stacking.
      • Manual reload of empty pallets.
      • Vacuum gripper.
      • OmniPack builder software.
      • Ewelix Liftkit.
      • Frame for slipsheet.
      • Safety scanners.
      • Three different angles for positioning conveyor.
      • Easy to move between production lines.
      • Colour and signal beacon.




    Weight max.10 kg

    Physical dimensions – Conveyor

    Length 1500 mm
    Width 304 mm
    Height 770 mm (+-50 mm)

    Physical dimensions – Unit

    Length 1360 mm
    Width 810 mm
    Height 800 mm (exclusieve Cobot)
    Height 2372 mm ( cobot fully extended)


    Cobot Palletizer | Doosan M1013

    By alax_automation In Cobot No comments

    Accumulation conveyor | ACC

    By alax_automation In Conveyor No comments

    Accumulation conveyor | ACC   Frame of SS304. Length conveyor 2500mm. Width conveyor 304mm. SEW Motor. Frequency inverter. Local control panel. Intralox S1000 chain. Different dimensions possible.     Physical dimensions Length 2500 mm Width 304 mm Height 600 mm

    Meer info

    Packfeeder | Plastic Botlle Unscrambler
    Robotic pickFeeder series | All about versatility – we are FLEXIBLE

    Packfeeder is a private company, started in 2002 in Terrassa, Barcelona, a leading company in bottle unscrambling solutions with worldwide patented technologies.

    Once again, the Packfeeder team manages to go one step further in the bottle unscrambling system world developing the pickFeeder series. This robotic bottle unscrambler, configurable with one, two, three or even four robots, offers a wide range of applications and possibilities. Our combination of delta robots with an intelligent track system makes the pickFeeder the most versatile automatic format change machine of the market, optimizing the performance of the intelligent systems and guaranteeing the best soft transfer in the world.



    • Maximum versatility
      All the bottle unscrambling machines in our pickFeeder series have a great adaptability to any kind of bottle and geometry to work. Thanks to the artificial vision, picking and tracking systems developed, the equipment will adapt automatically to the changing requirements in terms of shape, colours and needs of the packaging lines. Boost your possibilities with the pickFeeder series.
    • Close to Zero changeover
      Ideal for multi-format lines, where changeover must be fast, agile and clean, especially in small batch productions. With the pickFeeder robot bottle unscrambling series, we propose an automatic changeover to reduce the amount of downtime between production runs and forget about any kind of adjustment, setting or test before starting to produce again. This, also has a positive effect in terms of reducing the total cost of the equipment in its entire life cycle.
    • New formats, cost 0
      With the pickFeeder robotic bottle sorting series we can incorporate the concept of marginal cost 0 for the new formats. Thanks to the technology developed, the new containers won’t need new format parts neither complex configurations, therefore, the costs will be practically non-existent and the delivery time will be immediate due to the lack of new accessories to produce and adjust. Moreover, a simple application allows the user to easily configure new formats. We facilitate the launch of new products.
    • Do it Yourself
      Thanks to our state-of-the-art software vision and a simple application developed, the pickFeeder bottle unscrambler systems allows the customer to quickly and easily configure new formats with no need for delivery time or extra format parts, providing an effective, immediate and very cheap solution. The customers’ autonomy is maximum for the entire life cycle of the machine.
    • Permanent Bottle Vision
      The great visibility of the bottles offered by the Packfeeder robotic bottle unscramblers throughout its process, allows simple and quick operations when required optimizing the performance of the equipment and, consequently the one of the whole production line.
    • Extreme container care
      Thanks to our know-how in delicate applications such as using PET or PP materials, screen-printed bottles, labels or stamps, the new pickFeeder series keeps an exquisite treatment of the packaging throughout its process thanks to the use of the most advanced techniques and solutions for the handling of containers and objects.
    • Boosted productivity per m2
      The robotic bottle unscrambler concept developed by Packfeeder optimizes the space in the packaging room, offering the maximum production speed of the market for every square meter used. The ergonomics of the machine together with its efficient design, allow to increase the throwput of the available area.
    • Taylor made solutions
      The modularity of the pickFeeder series not only allows to choose between 1, 2, 3 or 4 robotic units, but also offers the possibility of incorporating other configurations depending of every project needs. Some of these configurable elements are pucks transportation system, orientation of asymmetric bottles, glass tray loader, bottle rinsing / cleaning systems or even coding & traceability. Everyhting designed to guarantee the best tailored solution for every customer.

    Click here to visit

    Packfeeder | Robotic pickFeeder series

    By alax_automation In Unscrambler No comments

    Packfeeder | Mechanical inLine series

    By alax_automation In Unscrambler No comments

    Packfeeder | Plastic Botlle Unscrambler Mechanical inLine series | Simplicity is a must – we are EASY Packfeeder is a private company, started in 2002 in Terrassa, Barcelona, a leading company in bottle unscrambling solutions with worldwide patented technologies. The Packfeeder team, with over 40 years’ experience in the packaging sector, has developed a unique […]

    Meer info

    ALtech ALline E | Front & back labelling machine
    Secondhand machine – Build in 2007

    The ALline E automatic labelling machine has been designed to apply one or two front/back labels to rectangular products, generally food, cosmetics, pharmaceutical and chemical products in plastic, glass or metal bottles and jars.


      • High-performance in-line front & back labelling machine for flat sided products.
      • Ultra robust fully enclosed base structure/chain conveyor/over structure – for complete system rigidity.
      • State-of-the art closed loop real-time-feedback synchronisation.
      • Central management controller with complete recipe saving function/remote access module.
      • Precision movement systems with standard scales and counters on all movement devices.





    Physical dimensions

    Length 2500 mm
    Width 1300 mm
    Height 1670 mm (exclusive signal beam)
    Height conveyor 885 mm

    ALtech ALline E | Labelling machine

    By alax_automation In Tweedehands No comments

    Flat deck table | BUF


      • Frame of SS304.
      • Length conveyor 2000mm.
      • Width conveyor 1200 mm.
      • SEW Motor.
      • Frequency inverter.
      • Local control panel.
      • Intralox S1500 chain.
      • Different dimensions possible.



    Physical dimensions

    Length 2000 mm
    Width 1200 mm
    Height 850 mm

    Flat table | BUF 1220

    By alax_automation In Conveyor No comments